Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | DOPRO |
Model Number : | DPAP4500 |
Certification : | ISO CE |
Price : | 200-9000 |
Supply Ability : | 7000 Pcs Per Month |
Delivery Time : | 3-7Working Days |
12-18 Tons Excavator Hydraulic Pulverizer For EX130 PC120 ZX130
SK120 CX130 CX160 JS140
Hydraulic Pulverizer Maintenance
1. Daily checkpoint: Whether there is any damage or defomation of
the bodyhose interface leakage, damage to the pin and bushing and
its replacementcycle, check the bolt and nut tightening loose
state, check the oil level of thegear, check the gear loosening,
tighten the bolt loosening.
2. Conventional checkpoint: the seals and rotating parts of the
hydrauliccylinder will wear out, and should be replaced in time
after reaching theservice life. Replacement parts should be matched
with the original factory.
3. Check the tightening state of bolts, install new bolts, check 8
hours after useand ensure that the tightened bolts are not loose.
Damaged bolts should bereplaced in time. Bolts should be replaced
after approximately 1500 hours or12 months of use after
installation.
4. When the demolition shears are in use, it is recommended to
check whetherthere is oil leakage regularly to ensure no fault.
5. Every four hours (less frequent play): fill lubricating oil,
lubric
6. Every half year or 1000 hours (whichever comes first) : replace
the hydrauliccylinder oil seal and motor oil seal once. If the oil
seal is not replaced withinthe prescribed period, there is a
certain probability that other parts of theproduct will be damaged,
such as: the cylinder pulled the cylinder body, etc.
SPECIFICATION | |||||
DESCRIPTION | UNIT | DPAP1600 | DPAP2000 | DPAP3000 | DPAP4500 |
Applicable Excavator | ton | 14~20 | 18~26 | 26~32 | 38~48 |
lbs | 30,864~44,092 | 39,683~57,320 | 57,320~70,547 | 83,775~105,821 | |
Operating Weight | kg/lbs | 1,250/2,755 | 1,800/3,968 | 2,350/5,180 | 3,450/7,605 |
Overall Length(L) | mm/inch | 1,580/62.2 | 1,806/71.1 | 1,990/78.3 | 2,336/919 |
JawOpening | mm/inch | 800/31.4 | 980/38.5 | 1,100/43.3 | 1,300/51.1 |
Force at Mid | ton/lbs | 70/154,323 | 120/264,554 | 195/429,901 | 270/595,248 |
Operating Pressure | bar/psi | 280/4,061 | 300/4,351 | 320/4,641 | 320/4,641 |
Setting Pressure | bar/psi | ||||
Rotation Type | Fixed |
The following excavator we can match | |
YUCHAI | YC35YC50YC55YC60YC65YC85YC135YC230 |
JCB | JS130JS210JS220JS290JS330 |
HYUNDAI | R55R60R80R130LC35R200R2005R210R2157/9R2205R225LC7/9R290 |
R290R290LC7R300LCR305LCR330LCR375R360LC7R450LC | |
CA*TERPILLAR | CA*T305.5CA*T306CA*T307CA*T308CA*T312CA*T315CA*T320CA*T323CA*T324 |
CA*T325CA*T326CA*T330CA*T336CA*T345CA*T349CA*T365CA*T374CA*T390 | |
KOMATSU | PC45PC50PC55PC56PC60567PC608PC708PC78PC1003PC1206 |
PC1307PC2007/8PC220PC270PC240PC3006/7PC360PC4006/7/8 PC4506 | |
PC6006PC6503PC650PC800PC1000PC1200PC1250 | |
ZXAIS/HITACAI | EX35EX40EX55EX60EX603ZX200ZX210ZX250ZX290ZX330ZX470EX1000EX1200 |
EC | EC55EC60EC140BPEW145BPEW160BBEC210EC240 |
EC290EC360LCEC380.EC460EC480EC700 | |
KOBELCO | SK35SK50SK60SK75SK100SK120SK200123456SK230SK250SK260SK280 |
SK300SK330SK3306SK350SK400SK450SK480 | |
DOOSAN/DAEWOO | DH35DH55DH60DH55DH60DH80DH807DH80GOLDDH150 |
DH200DH22035DH2805DX60DX200DX225DX260DH290DH360DH420DH500 | |
SUMITOMO | SH55SH60SH75SH50SH100SH120SH200 |
SH20035SH22023SH280SH300SH350SH400SH450 | |
LIUGONG | CLG904CLG9055CLG906CLG907CLG9075CLG908CLG915CLG150 |
CLG920CLG921CLG922CLG225CLG924CLG925CLG933CLG936CLG939 | |
CLG942 CLG948CLG950CLG952CLG200CLG205CLG220CLG225 | |
KUBOTA | KX135KX185KX155KX161KX163KX165KX183 |
IHI | IHI35IHI50IHI60IHI55IHI80IHI100 |
XCMG | XE55XE60XE65XE75XE80XE85XE135XE150XE155XE200XE205XE215 |
XE225XE245XE270XE305XE335XE370XE380XE400XE470XE490 XE700 | |
YANMAR | ViO35ViO55ViO75 |
cx | CX50CX55CX58CX75CX210CX240CX290CX330 |
KATO | HD820HD1023HD1430HD2045HD700 |
SANY | SY55SY60SY65SY70SY75SY85SY95SY115SY135SY155SY195SY200SY205SY215 |
SY220SY225SY235SY245SY285SY305SY335SY365SY375 SY395SY415SY485 |
![]() |